The AirTac MK23 Series to M4 HPA Adapter is a modular conversion magazine that lets compatible MK23 Series gas pistols run from an external HPA system while feeding from Airsoft M4 AEG magazines. Designed for the TM MK23, SSX23, SSX303 and clone MK23 platforms, it is a practical way to gain significant ammunition capacity without giving up the compact handling that makes the MK23 popular. The AirTac brand is built around reliable, well-engineered magazine solutions, and this adapter follows that approach.
Key Features of the MK23 HPA adapter
- Fully printed gas magazine – a lightweight, rigid body that reduces weight compared to previous adapter designs.
- High internal air volume – maintains the air capacity needed for consistent operation within the 90–150 PSI operating range.
- Plug and play assembly – valve, feed lips and gas router are pre-installed, so no donor parts or assembly are required.
- Adjustable nozzle seal – two integrated grub screws allow the adapter position to be tuned for a clean nozzle-to-gas router seal.
- Modular magwell system – the M4 magwell can be swapped for Angled M4, MP5, Shotgun Shell or Compact Drum configurations.
- Supplied M4 magazine shims – help achieve a secure fit with a wide range of Airsoft M4 AEG magazines.
- US Foster HPA quick disconnect – fitted as standard for straightforward connection to regulated HPA systems.
Real-World Use Cases
This adapter suits UK CQB indoor sites, where a larger magazine capacity reduces reloads during close-range engagements. It is equally useful for woodland skirmish games where players want extended sustained fire from a compact sidearm, and for speedsoft play where quick reloads matter less than uninterrupted fire.
For UK sites, check your venue’s rules on HPA-powered sidearms and confirm that your setup remains within the site’s FPS or joule limit, typically measured with 0.20 g BBs. Many UK sites use a 0.25 g BB as a benchmark, so verify the required BB weight before play.
Technical Specifications
- Brand: AirTac
- Product Type: Magazine (HPA Adapter)
- Compatibility: TM MK23, SSX23, SSX303 and clone MK23 platforms
- Magwell Format: M4 (interchangeable modular magwell system)
- Recommended Operating Pressure: 90–150 PSI
- Maximum Operating Pressure: 150 PSI
- Fitting: US Foster HPA quick disconnect
- Construction: Fully printed gas magazine body
What’s in the Box
- AirTac MK23 Series to M4 HPA Adapter (fully assembled)
- M4 magazine fitment shims
- US Foster HPA quick disconnect fitting
Compatibility & Upgrades
This adapter is designed for compatible MK23 Series platforms and works with a wide range of M4 AEG magazines. Use it with a regulated HPA system within the 90–150 PSI operating range. For the best results, pair it with a suitable regulator and HPA line, and consider interchangeable AIRTAC modular magwells if you want to change magazine formats later.
UK Legal & Site Notes
Airsoft replica firearms are for use by persons aged 18 and over only. Realistic imitation firearms (RIFs) require UKARA or VCRA defence where applicable, and two-tone markings may be needed depending on the replica. Always check your site’s FPS and joule limits before use and confirm that your magazine and HPA setup complies with those rules.
Ready to upgrade your MK23 setup? This AirTac HPA adapter comes with fast UK dispatch from Airsoftdirect. Browse our related magazines, HPA regulators and MK23 accessories to complete your build. Browse our full range of magazines.












