Jing Gong PM5K AEG Submachine Gun – Compact V6 Black
Jing Gong PM5K AEG is a compact submachine gun perfect for close-quarters airsoft skirmishes. With 350fps velocity, V6 gearbox reliability, and a 100-round magazine capacity, it delivers consistent performance in tight spaces. Fixed stock and 20mm rails provide solid upgrade potential.
The Jing Gong PM5K AEG brings iconic submachine-gun handling to your airsoft loadout. This electric replica combines proven V6 gearbox internals with a lightweight polymer chassis, making it an excellent choice for players who prioritise manoeuvrability without sacrificing firepower.
Key Features
- Compact 51cm length – ideal for CQB, urban, and indoor skirmishes
- V6 gearbox – reliable, established platform with strong aftermarket support
- 350fps chronograph velocity (0.20g BBs) – site-legal for most UK venues
- 100-round magazine capacity – reduces reload frequency in sustained fire
- Dual-mode trigger system – safe, semi-automatic, full automatic, and two-stage options
- 20mm RIS/RAS receiver – accepts optics, grips, and tactical accessories
- Alloy upper receiver – durable, lightweight construction
- Fixed polymer stock with internal hop-up adjustment – thumb-hole ergonomics
Real-World Use Cases
This submachine gun excels in close-quarters battle scenarios, CQB halls, and indoor arenas where compact frame and rapid handling matter. The lightweight design and accessible hop-up port make it quick to tune on-site. P90-compatible magazines keep logistics simple if you run multiple AEGs from the same platform. Milsim players valuing historical accuracy and skirmishers needing a secondary or primary short-range tool will find consistent performance here.
Technical Specifications
- FPS (0.20g BBs): ~350fps ± 10%
- Length: 51 cm
- Weight: ~2.26 kg
- Inner Barrel: 10.4 inches
- Gearbox: V6
- Motor: Standard
- Magazine Capacity: ~100 rounds
- Magazine Compatibility: Standard P90 AEG magazines (King Arms branded recommended)
- Firing Modes: Safe, semi-automatic, full automatic, two-stage trigger
- Rail System: 20mm RIS/RAS receiver
- Stock: Fixed
- Construction: Alloy upper receiver, high-density polymer stock/chassis, steel charging handles
- Power Source: Electric (battery not included)
Compatibility & Upgrades
The V6 gearbox is a proven platform with extensive aftermarket support. Springs, pistons, and sector gears from established manufacturers integrate seamlessly. The 20mm top rail accepts modern optics, whilst the RIS handguard permits fore-grips, light mounts, and rail-based accessories. P90-pattern magazine compatibility opens supply-chain flexibility if you own other replicas using that feed system. As a fixed-stock design, internal upgrades focus on internals rather than stock-buffer customisation.
UK Legal & Site Notes
At approximately 350fps on 0.20g ammo, this replica sits comfortably within legal limits for most UK skirmish sites (typically 350–500fps depending on venue and engagement distance rules). Always chrono on-site with your site’s preferred 0.20g test ammo and confirm compliance before play. Note that a 2-tone colour variant is available; confirm your venue’s finish requirements if purchasing new. Battery and charger are sold separately – budget for a quality LiPo or NiMH pack suitable for V6 gearbox applications.
Ready to add a compact submachine gun to your kit? Browse our full Jing Gong range or shop compatible P90 magazines and upgrade parts. Visit Airsoftdirect for stock checks, reviews, and expert advice.
| pa_platform-type | Submachine Gun |
|---|---|
| pa_ukara-required | Yes,No, |
| pa_included-items | Magazine |
| pa_skill-level | Beginner Player |
| pa_warnings | Li-PoLi-Po – Never Leave Charging UnattendedLi-Po – Only Use Approved ChargersLi-Po – Charge in a Fire Safe Area |
| pa_fps | Approx.350fps ± 10%, using 0.20g BBs |
| pa_weight | Approx.2.26KG |
| pa_length | 51cm |
| Brand | Jing Gong |
| pa_colour | Black,Pre Two-Tone Pink, |
| pa_construction | Alloy upper receiver assembly. High density polymer stock/chassis. Steel charging handle bars. |
| pa_powered-by | Electric |
| pa_blowback-type | None |
| Platform | P90 |
| pa_fire-modes | SafeSemi AutomaticFull AutomaticTwo Stage Trigger |
| pa_shooter-configuration | Ambidextrous |
| pa_hop-up-type | Inside the stock thumbhole, accessible with the port door opened by hand. |
| pa_hop-up-adjuster | Rotary |
| pa_rail-system | 20mm RIS / RAS,20mm Railed Receiver, |
| pa_stock-type | Fixed |
| pa_sight-type | Aperture Iron Sight,Open Iron Sight, |
| pa_sling-options | Stock,Loop,Receiver, |
| pa_barrel-length | 10.4'' |
| pa_barrel-diameter | 6.05mm |
| pa_magazine-type | Standard P90 AEG Magazines. King Arms branded magazines recommended. |
| pa_magazine-capacity | Approx.100Rounds |
| pa_gearbox-version | V6Gearbox |
| pa_gearbox-wiring | Rear Wired |
| pa_outer-barrel-thread | Male |
| pa_gearbox-quick-change | Yes |
| pa_motor-type | Standard |
| pa_battery-voltage | No |
| pa_battery-connector | Mini Tamiya |
